弹性基上圆柱管弯曲行为的高阶剪切梁理论解

以弹性基上圆柱管为研究对象,基于高阶剪切变形梁理论推导了Winkler弹性基圆柱管弯曲变形的高阶剪切梁理论控制方程,给出四种典型工况弯曲问题的精确解.研究表明,无须假设剪切修正系数,只需引入适当横截面翘曲形状函数,高阶梁理论在圆柱管内外表面满足剪应力τxr为零的边界条件,且对于不同长径比和厚径比的圆柱管弯曲问题均能提供...     

A higher order coupled frequency characteristics study of smartmagneto-electro-elastic composite plates with cut-outs using finite element methods

This article deals with investigating the effect of cut-outs on the natural frequencies of magneto-electro-elastic (MEE) plates incorporating finite element methods based on higher order shear deformation theory (HSDT). In order to consider the influence of cut-out, the energy of the cut-out domain is sub-tracted from the total energy of the entire plate. The governing equations of motions are derived through incorporating Hamilton's principle and the solution is obtained using condensation technique. The proposed numerical formulation is verified with the results of previously published literature as well as the numerical software. In addition, this research focuses on evaluating the effect of geometrical skewness and boundary conditions on the frequency response. The influence of cut-outs on the degree of coupling between magnetic, electric and elasticfields is also investigated.     

Numerical simulation study on penetration performance of depleted Uranium (DU) alloy fragments

Due to its high strength, high density, high hardness and good penetration capabilities, Depleted ura-nium alloys have already shined in armor-piercing projectiles. There should also be a lot of room for improvement in the application of fragment killing elements. Therefore, regarding the performance of the depleted uranium alloy to penetrate the target plate, further investigation is needed to analyze its advantages and disadvantages compared to tungsten alloy. To study the difference in penetration per-formance between depleted uranium alloy and tungsten alloy fragments,firstly, a theoretical analysis of the adiabatic shear sensitivity of DU and tungsten alloys was given from the perspective of material constitutive model. Then, taking the cylindrical fragment penetration target as the research object, the penetration process and velocity characteristics of the steel target plates penetrated by DU alloy frag-ment and tungsten alloy fragment were compared and analyzed, by using finite element software ANSYS/LS-DYNA and Lagrange algorithm. Lastly, the influence of different postures when impacting target and different fragment shapes on the penetration results is carried out in the research. The results show that in the penetration process of the DU and tungsten alloy fragments, the self-sharpening properties of the DU alloy can make the fragment head sharper and the penetrating ability enhance. Under the same conditions, the penetration capability of cylindrical fragment impacting target in vertical posture is better than that in horizontal posture, and the penetration capability of the spherical fragment is slightly better than that of cylindrical fragment.     

An interface shear damage model of chromium coating/steel substrate under thermal erosion load

The Cr-plated coating inside a gun barrel can effectively improve the barrel's erosion resistance and thus increase the service life.However,due to the cyclic thermal load caused by high-temperature gun-powder,micro-element damage tends to occur within the Cr coating/steel substrate interface,leading to a gradual deterioration in macro-mechanical properties for the material in the related region.In order to mimic this cyclic thermal load and,thereby,study the thermal erosion behavior of the Cr coating on the barrel's inner wall,a laser emitter is utilized in the current study.With the help of in-situ tensile test and finite element simulation results,a shear stress distribution law of the Cr coating/steel substrate and a change law of the interface ultimate shear strength are identified.Studies have shown that the Cr coating/steel substrate interface's ultimate shear strength has a significant weakening effect due to increasing temperature.In this study,the interfacial ultimate shear strength decreases from 2.57 GPa(no erosion)to 1.02 GPa(laser power is 160 W).The data from this experiment is employed to establish a Cr coating/steel substrate interface shear damage model.And this model is used to predict the flaking process of Cr coating by finite element method.The simulation results show that the increase of coating crack spacing and coating thickness will increase the service life of gun barrel.     

基于组合媒质通道模型的地下目标成像

由于电磁波在穿越不同介质时会出现折射现象,因此在地下目标成像过程中,电磁波信号穿越从雷达到地下目标的组合通道的路径不是直线而是折线,此时利用常规的自由空间中的合成孔径成像方法已经不能对目标进行成像。基于电磁波的传播规律和地层有耗媒质的特性,提出了电磁波传输的组合通道模型,并将其应用到地下目标成像中。通过仿真比较可以看出,使用组合通道模型对地下目标成像效果有明显的改善,组合通道模型适用于对分层土壤中的地下目标成像。     

爆炸复合接头剪切强度测试方法研究

参照正交各向异性层压复合板层间剪切强度的测试方法,提出了用于测试爆炸复合接头复合界面剪切强度的3种方法;并建立三维有限元模型,分别对3种测试方法进行模拟;最后分别对3种方法进行了测试试验.结果表明,3种试验方法均能有效测试爆炸复合接头的剪切强度,其中对称试件双切口拉伸法最适合实际应用.     

THE CASE FOR DEFENCE

What is the case for defence and is it a worthwhile investment? This question is addressed for two contrasting nations, namely, the UK and New Zealand. Economists have a set of standard analytical tools for addressing the question but they are difficult to operationalise. This paper provides policy‐relevant answers.     

基于CPU-GPU混合计算平台的RNA二级结构预测算法并行化研究

RNA二级结构预测是生物信息学领域重要的研究方向,基于最小自由能模型的Zuker算法是目前该领域最典型使用最广泛的算法之一。本文基于CPU GPU的混合计算平台实现了对Zuker算法的并行和加速。根据CPU和GPU计算性能的差异,通过合理的任务分配策略,实现二者之间的并行协作计算和处理单元间的负载平衡;针对CPU和GPU的不同硬件特性,对Zuker算法在CPU和GPU上的实现分别采取了不同的并行优化方法,提高了混合加速系统的计算性能。实验结果表明,CPU处理单元在混合系统中承担了14%以上的计算任务,与传统的多核CPU并行方案相比,采用混合并行加速方法可获得15.93的全局加速比;与最优的单纯GPU加速方案相比,可获得16%的性能提升,并且该混合计算方案可用于对其它生物信息学序列分析应用的并行和加速。     

谈外国旅游团来琼免签政策实施的不足与完善

外国旅游团来琼免签政策是目前我国实施时间最长、最宽松的区域性免签便利政策。阐述了外国旅游团来琼免签政策沿革演变历程,从入出境管理和边防检查的角度分析了其施行过程中存在的不足与原因,提出了完善免签政策的措施。